Відео

RetroSpec Yes, two LED lights in the corners

Iccccie thank you, going to order two. I have just bought a vmc600

I also have the same machine in Sweden, with Heidenhain control 1997, if you want to share info let me know!

Hey bud. Mine is a manual tailstock so I have no clue!

Hey, I have a Siemens 840 control. It's very simple to program with contour programming, then it's just a turn cycle.

Ping . . .any word?

Hi Not it's either an Emco original or a SCA chuck

+Raul Castañeda It's cycle97. watch my other video OP 2 with control screen in view. ua-cam.com/video/xTtASXZ85L4/v-deo.html

I just sold it a couple of months ago. I bought a PC turn 155 with driven tools and C axis instead. But if I remember correctly it was 20mm.

+Iccccie I am looking at a PC Turn 120 for around $3200. Is there any advice you'd like to pitch my way?

+Mike Spike Yeah they are great little machines, affordable for a hobbyist. Make sure the machine haven't lost its license for WinNC, they are about $2500 from EMCO. Support is not great from emco on these old machines however there is a bit of an community out there for these machines. There is a Yahoo group.

+Iccccie Thanks much for that info-bit on the license. Do you think $3200 is a reasonable price to pay?

+Mike Spike For a working machine, absolutely. I sold mine for about the same.

+camcompco Hi John, Thanks! Largest piece you can turn according to the specs is 85mm x 245mm however the swing is 250mm so with some clever tool holding i'd say you can turn slightly larger pieces. All the tools used in this video have a 12mm shank held in VDI16 holders

+Iccccie Hi Again, Well, guess what my You-Tube friend. . .I just bought a EMCO Concept 155 Mill and a EMCO Concept Turn 155 Lathe, a local technical college auctioned them off. I have yet to power them up but working on that next week. I am trying to get my head around the Fanuc 21 programming now, new to me. Could I by any chance trouble you for the code you used for the part you made. I could use it as a starting point for learning how to use the driven tools on the C-Axis. Can I ask, your not by any chance in Michigan are you? I would love to start a little machining club and I live near Ann Arbor. my email address is camcompco@gmail.com (in case your feeling kind :-) Just wondering, was that part fore some kind of steam engine or some such? All the best John

+Iccccie How did you power your lathe, did you hook it up to a Dongan Transformer? Thanks lccccie

+camcompco Hi, I'm extremely sorry for the very late reply! Congratulations on your purchase, i hope it will suit you well! What options did it have? I wish mine had the pneumatic option for the chuck and tailstock and a parts catcher. I'm afraid I'm nowhere near Michigan, I'm from across the atlantic ;) So the need for a transformer is not required here, i have 400 volt 3 phase jack. My machine came with Siemens Sinumerik 840D so it's a bit different from the Fanuc 21. Maybe not so much in the Y/C- axis programming but definitely with the engaging of the C-axis. I'll send you my program on your email shortly. Also i will send you a link for another video i haven't yet published where i also filmed the control of the machine so can se the program run too. Yes this is just a part for the axle pump for a steam locomotive im building. All the best Patrik

hugo sieurac Hello! No, you have to change gears manually with the stick! Thx for commenting!

@@Iccccie is the K40 esc usable with any motors? Whats its motor limit rating and input voltage max limit?

@@Iccccie will the K40 combo with Smx module is usable on a 4x4 truck as Tamiya Bruiser/Mountaineer?its have the 3-speed manual shifted by servo transmission.actually

Hi i got it directly from pistenking in germany www . pistenking . de , can be bought from numerous hobby shops for 1:14-16 trucks. They are not cheap however!!

It's a veroma gearbox bought from fechtner modelbau in germany

is it suitable for heavy haulage? I am considering buying one. Gearshift is automatic or manual?

I guess it depends on what you call heavy haulage. BUT i did try to sit on my trailer and i weight in at 80kgs and drove around and it worked fine. You need a servo to control the gear shifts. I use the Servonaut K40 speed controller. Manual gearshifts but i think you are able to program the K40 for automatic gear changes.

80kgs? WOW! I use M20+ would it worked for autoshifts?

The M20+ does not support gear shifts. This doesn't mean you cant have a gearbox because you can, you just have to control it manually and you obviously don't get the sound effects and RPM drop on the motor so the truck will accelerate or decelerate with the gear changes.

not sure about current pricing, but basic kit comes in at around € 6.000

where do i get that?

Christoph Reitbauer Its made by Damitz www.der-modellbagger.com , send them an email for more info, waiting time is at least 6 months.